358 dimensions performance environment al electrical mechanical www.honeywell.com/sensotec ? 0.19 in. ? 0.81 in. range codes available s troke ranges l (in.) x (in.) approx. unit w eight (oz.) x nominal electric zero point l 0.35 in. model dlf dc-dc long stroke lvdt order code by129 hp +/- 0.5 in. 7.15 1.5 8.0 hq +/- 1.0 in. 8.25 2.5 10.0 hr +/- 2.0 in. 12.75 3.0 14.0 hs +/- 3.0 in. 17.4 4.5 18.0 n low voltage requirements n easy to operate n stainless steel n reverse polarity protected wiring codes yellow brown r ed blue black green shield 5v supply w ire 6-18vdc supply +5v input yellow connect to brown insulate brown connect to yellow insulate red +6 to +18 vdc supply com. (0v) blue supply com. (0v) output low black output low output high green output high instrument ground shield instrument ground note: incorrect connection may cause irreparable damage, contact factory for assistance s troke range................+/- 0.5 to 3.0 in. non-linearity (max.) ................ +/- 0.25% full scale output load (min.)................2,000 ohms output impedance................2 ohms output sensitivity ................ +/- 2 vdc (nominal) isolation................1,000 v input to output polarity................output positive for outward stroke t emperature, operating................-58 to 158f temperature, effect zero (max.)................0.006% full scale/f s pan (max.)................0.017% full scale/f element type................dc-dc lvdt input supply (accept able) regulated................5 vdc @ 100 ma max. unregulated................+6 v to +18 vdc @ 100 ma max. ripple ................ 30 mv peak to peak electrical termination................multiconductor shielded cable (6 ft.) reverse polarity protection................yes case material................stainless steel probe material................stainless steel armature type................captive guided spring return probe thread................ m2.5 female weight................see above table s pring force (max.)................4.0 oz./ in. 1-888-282-9891
359 www.honeywell.com/sensotec 1-888-282-9891 range range code +/- 0.5 in. hp +/- 1.0 in. hq +/- 2.0 in. hr +/- 3.0 in. hs range codes options how to order the order code consist s of the product model, the desired range code and the available options. model code range code options code sample code: by129 hq l10 model dlf supplied as standard model dlf h igh level input display unit s g m-a (note 1) sc500 sc1000s c2000 sc3004 dc power supply r equired if high level input display unit is not being u sed. c ustomer supplied c hart recorder a larm panel data acquisition c omputer plc mounting blocks aa937 probe t ip assemblies radiused probe ball ended probe fast track delivery built to order stroke ranges +/- 0.5 to 3.0 in. electrical termination multiconductor shielded cable (6 ft.) tm405. axial bendix connector on body radial (side) tm406. bendix connector on body electrical cable orient ation tm49. axial cable exit mounting threads tm511. 13/16 - 32 unf improved linearity l10. +/- 0.1% max. linearity typical system diagram notes 1. gm-a should not be used with an amplified l vdt unless using an external power supply to power the l vdt. approved -not rohs compliant s pecial customer requirements (consult factory) t .e.d.s. ieee 1451.4 module signature calibration
|
